Residual stress induced failure of Ti-6Al-4V/Si3N4 joints brazed with Ag-Cu-Ti filler: The effects of brazing zone’s elasto-plasticity and ceramics' intrinsic properties FS Ong, B Rheingans, K Goto, H Tobe, T Ohmura, J Janczak-Rusch, ... Journal of the European Ceramic Society 41 (13), 6319-6329, 2021 | 31 | 2021 |
Intermetallics evolution and fracture behavior of Nb interlayer inserted Si3N4/Ti joints brazed with AgCuTi filler FS Ong, H Tobe, E Sato Materials Science and Engineering: A 762, 138096, 2019 | 30 | 2019 |
Microstructural evolution and mechanical characterization of Nb-interlayer-inserted Ti–6Al–4V/Si3N4 joints brazed with AuNiTi filler FS Ong, H Tobe, G Fujii, E Sato Materials Science and Engineering: A 778, 139093, 2020 | 18 | 2020 |
Strength optimization of two-step-bonded Ti-6Al-4V/Si3N4 joint with Nb interlayer via transient-liquid-phase bonding and active-metal brazing FS Ong, R Nishi, H Tobe, E Sato Journal of the European Ceramic Society 42 (6), 2707-2717, 2022 | 8 | 2022 |
Simultaneous intermetallics suppression and residual-stress relaxation of heat-resistant Nb-interlayer-inserted Ti-6Al-4V/Si3N4 joints via one-step transient liquid phase … FS Ong, H Tobe, E Sato Journal of Materials Science & Technology 139, 79-91, 2023 | 5 | 2023 |
Strength optimization of low-pressure transient liquid phase bonded Ti–6Al–4V similar joint with Cu–Ni multi-interlayer R Nishi, FS Ong, H Tobe, E Sato Materials Science and Engineering: A 846, 143275, 2022 | 4 | 2022 |
Tetragonal phase stabilization and densification in AC flash-sintered 1.5 mol% yttria-stabilized zirconia polycrystals with high toughness FS Ong, K Nambu, K Hosoi, K Kawamura, H Masuda, B Feng, K Matsui, ... Journal of the European Ceramic Society 44 (2), 1036-1043, 2024 | 3 | 2024 |