| Selection and verification of kenaf fibres as an alternative friction material using Weighted Decision Matrix method MFB Abdollah, FF Shuhimi, N Ismail, H Amiruddin, N Umehara Materials & Design 67, 577-582, 2015 | 71 | 2015 |
| Optimization of Tribological Performance of hBN/AL2O3Nanoparticles as Engine Oil Additives MIHC Abdullah, MFB Abdollah, H Amiruddin, N Tamaldin, NRM Nuri Procedia Engineering 68, 313-319, 2013 | 67 | 2013 |
| Effect of hexagonal boron nitride nanoparticles as an additive on the extreme pressure properties of engine oil MIHC Abdullah, MFB Abdollah, N Tamaldin, H Amiruddin, NRM Nuri Industrial Lubrication and Tribology, 2016 | 49 | 2016 |
| Effect of hBN/Al2O3 nanoparticle additives on the tribological performance of engine oil MIHC Abdullah, MF Abdollah, H Amiruddin, N Tamaldin, NRM Nuri Jurnal Teknologi 66 (3), 2014 | 44 | 2014 |
| Tribological characteristics comparison for oil palm fibre/epoxy and kenaf fibre/epoxy composites under dry sliding conditions FF Shuhimi, MFB Abdollah, MA Kalam, M Hassan, H Amiruddin Tribology International 101, 247-254, 2016 | 40 | 2016 |
| Stability of nano-oil by pH control in stationary conditions H Amiruddin, MFB Abdollah, AM Idris, M Abdullah, N Tamaldin Proceedings of Mechanical Engineering Research Day 2015, 55-56, 2015 | 20 | 2015 |
| The potential of hBN nanoparticles as friction modifier and antiwear additive in engine oil MIHC Abdullah, MFB Abdollah, H Amiruddin, N Tamaldin, NRM Nuri Mechanics & Industry 17 (1), 104, 2016 | 19 | 2016 |
| A comprehensive review on numerical and experimental study of nanofluid performance in microchannel heatsink (MCHS) WMAA Japar, NAC Sidik, SR Aid, Y Asako, TL Ken Journal of Advanced Research in Fluid Mechanics and Thermal Sciences 45 (1 …, 2018 | 18 | 2018 |
| The effect of sliding distance at different temperatures on the tribological properties of a palm kernel activated carbon–epoxy composite NAM Tahir, MFB Abdollah, R Hasan, H Amiruddin Tribology International 94, 352-359, 2016 | 18 | 2016 |
| Materials selection for eco-aware lightweight friction material A Mustafa, MFB Abdollah, N Ismail, H Amiruddin, N Umehara Mechanics & Industry 15 (4), 279-285, 2014 | 15 | 2014 |
| Effect of hBN/Al2O3 nanoparticles on engine oil properties M Abdullah, MFB Abdollah, H Amiruddin, NRM Nuri, N Tamaldin, ... Energy Education Science and Technology Part A: Energy Science and Research …, 2014 | 15 | 2014 |
| Potential of palm kernel activated carbon epoxy (PKAC-E) composite as solid lubricant: Effect of load on friction and wear properties KW Chua, MFB Abdollah, N Ismail, H Amiruddin Jurnal Tribologi 2, 31-38, 2014 | 14 | 2014 |
| Frictional behavior of bearing material under gas lubricated conditions MFB Abdollah, MAA Mazlan, H Amiruddin, N Tamaldin Procedia Engineering 68, 688-693, 2013 | 11 | 2013 |
| A brief review on the wear mechanisms and interfaces of carbon based materials NAM Tahir, MFB Abdollah, N Tamaldin, H Amiruddin, MRB Mohamad Zin Composite Interfaces 25 (5-7), 491-513, 2018 | 10 | 2018 |
| Improving engine oil properties by dispersion of hBN/Al2O3 nanoparticles MIHC Abdullah, MF bin Abdollah, H Amiruddin, N Tamaldin, NRM Nuri, ... Applied Mechanics and Materials 607, 70-73, 2014 | 9 | 2014 |
| Elastohydrodynamics lubrication for bio-based lubricants in elliptical conjunction ZH Nazri, MZM Rody, MFB Abdollah, SA Rafeq, H Amiruddin, N Tamaldin, ... Procedia Engineering 68, 123-129, 2013 | 9 | 2013 |
| The effect of temperature on the tribological properties of palm kernel activated carbon-epoxy composite NAM Tahir, MFB Abdollah, R Hasan, H Amiruddin Tribology Online 10 (6), 428-433, 2015 | 8 | 2015 |
| Influence of contact pressure and sliding speed dependence on the tribological characteristics of an activated carbon-epoxy composite derived from palm kernel under dry sliding … DNF Mahmud, MFB Abdollah, NAB Masripan, N Tamaldin, H Amiruddin Friction 7 (3), 227-236, 2019 | 7 | 2019 |
| Experimental analysis of tribological performance of palm oil blended with hexagonal boron nitride nanoparticles as an environment-friendly lubricant MFB Abdollah, H Amiruddin, AD Jamallulil The International Journal of Advanced Manufacturing Technology 106 (9), 4183 …, 2020 | 6 | 2020 |
| Comparative study of the tribological behaviour of 3D-printed and moulded ABS under lubricated condition H Amiruddin, MFB Abdollah, NA Norashid Materials Research Express 6 (8), 085328, 2019 | 6 | 2019 |
Mohd Fadzli Bin Abdollah; MFB Abdoll...Universiti Teknikal Malaysia Melaka, Nagoya UniversityVerified email at utem.edu.my
